Black Pearl 7" HD Screen FPV Diversity Rx 5.8GHz slim design with Integrated battery
If you are looking for a easy to use FPV system on the ground then the Black Pearl is the ideal setup. The monitor and receivers are built ito one unit that allows you to quickly setup your FPV gear on the ground with no messy or complicated wires. Making for easy transportation/storage. This Black Pearl monitor now come with an integrated battery
The built in 5.8Ghz DIversity will ensure you always get the best possible signal, and allows you to use differant antennas if you require. This monitor is also ultra bright and comes with a sunshade visor.
This is a high resolution 7 inch (1024 x 600 resolution) FPV Monitor with a built in 5.8Ghz Diversity Receiver. This Black Pearl monitor is ideal for those who want FPV system that is quick to setup and easy to transport. Because the 5.8Ghz Diversity receiver is built in you don't need to worry about lots of wires or batteries to power each individual part, you just need to plug the monitor into your battery/ other power source and you are good to go. You can still use this FPV monitor/receiver with some goggles via the video outputs. The built in 5.8Ghz Diversity receiver will always ensure you are getting the best video signal and also allows you to use two different antennas if you want.
This monitor is compatible with the 5.8Ghz transmitters we sell. But if you are unsure, please make sure that the channel frequencies on your transmitter will match a channel on this receiver, see table below.
• Screen size:7”
• Resolution: 1024 x 600
• Brightness: 300cd/m2
• Contrast: 700:1
• Frequency : ISM 5.8Ghz
• RX sensitivity: -90dBM
• Diversity: Yes
• Video Standard: NSTC/PAL (automatic switching)
• Video Output Level: 1.0Vp-p, 75ohm
• Audio Output Level: 1.0Vp-p, 10Kohm
• RX1 AV Out: Video, mono audio output
• RX2 AV Out: Video, mono audio output
• AV In: Video, stereo audio output
• HDMI input
• Built in Speaker X2: 8ohm, 1W
• DC In / Out: 7 ~28V (suggested to use 3S lipo battery (1000mah) with JST connector
• Size: 183x126x19.5mm
• Temperature: -10