Your shopping cart is empty!
Welcome to IntelligentUAS   Connect   Login   Register
Hours
 
Contact

Company & Showroom

intelligentUAS
7040 Virginia Manor Road
Beltsville, MD 20705
United States

We welcome store visits - No appointment needed.
We're 25 min from Washington DC Main entrance in rear of building

Phone / Fax:
1-855-YES-1UAS
1-855-937-1827
 
Email: click here

Skype: intelligentUAS

Products Filter

Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector

Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector
Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector Thermal Intelligent UAS Solution for Fire Fighter, Search & Rescuer, Pipe Inspector
Brand: DJI
Product Code: ThermalUAS
Reward Points: 1480
Availability: In Stock (6 already sold)
Cash back: You can earn up to $314.97 credit toward your next purchase. >>Click here<<
$8,999.00

Available Options


CPS Accidental Warranty Protection Plan:



Lens Option 324p (stock availability may depend on specific option - contact for info):









Camera and Gimbal:



Digital Video Recorder for FPV:


Lighting options:


Charger Options:




FPV/Video Downlink/Monitor:





Radio Options:


Shipping Insurance:


 
   - OR -   
CPS ACCIDENTAL WARRANTY PROTECTION (DRONE INSURANCE)
Please read Terms & Conditions first before purchase. For mo re information, please click here

 

We're glad to introduce our Thermal Intelligent UAS for Fire Fighter, Search & Rescuer, Pipe Inspector

This is a complete solution that can be deployed within 5 minutes or less. It includes the following

 

A READY-TO-DEPLOY

DJI F550 Hexacopter with Autopilot and GPS positioning

FLIR Tau 2 - 324 Thermal Camera for thermal vision

GoPro Hero 3 Camera for daylight vision

Data Link + iPad for Flying with waypoint

Ground Station + FPV for real-time vision and data acquisition from ground

and other components/accessories as a complete package

Plus 1 day training for two pilots/operators

 

 

Major components

DJI NAZA-M V2 GPS,

Senrigan Brushless gimbal,

Futaba 14SG,

DJI White landing gear

and 4S - 4000mah Lipo battery

 

 

COMPATIBLE WITH DJI FLIGHT CONTROL SYSTEMS
 
 
The H3-2D gimbal is compatible with DJI flight control systems, it can adjust the roll and pitch angle according to the accurate control of the Gimbal feedback and communicate with the MC in real-time. Currently it supports WooKong-M, NAZA-M, Phantom, and will support Ace, WooKong-H, NAZA-H in the future.
 
 
THE CORE TECHNOLOGY INHERITED FROM THE ZENMUSE
 
 
The H3-2D gimbal inherited the core algorithm from the Zenmuse Z15 gimbal and the unmanned aircraft flying attitude stability control algorithm. Combined with the high precision sensors and brushless motors, the DJI Zenmuse H3-2D gimbal provides pixel level stabilized footage.
 
 
INDEPENDENT IMU MODULE
 
 
The independent high-precision IMU module provides precise attitude data and the closed-loop control gives improved control accuracy.Without the requirement of complex installation and connection of many wires, it is also easy to assemble and remains stable when in flight.
 
 
EXTREMELY LIGHT WEIGHT WITH SOLID MECHANICAL DESIGN
 
 
The aluminum alloy material and innovative mechanical design makes the gimbal extremely light weight (total 230g, GoPro Hero3 included). The structural design of the aluminum frame guarantees the strength of the gimbal.
 
 
IDEAL CHOICE FOR PHANTOM AND FLAME WHEEL
 
 
The mechanical design, weight and power supply will match the Phantom and Flame Wheel perfectly. The Phantom transmitter can be easily upgraded to give the pitchcontrol function of the gimbal, with a customized slider. No additional receiver channels are needed, it just uses the additional MC channels.
 
 
ONLINE UPGRADE
 
 
The functionality can be easily updated by online firmware upgrades.
 
NAZA-M V2 + GPS combo
 
ALL-IN-ONE DESIGN
 
DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.
 
 
INDEPENDENT PMU WITH AMAZING FUNCTION EXTENSION
 
The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)
 
 
ADVANCED & IMPROVED ATTITUDE STABILIZATION ALGORITHM
 
The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.
 
 
NINE TYPES OF MULTI-ROTORS SUPPORTED
 
Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.
 
 
MULTIPLE FLIGHT CONTROL MODES/INTELLIGENT SWITCHING
 
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.
 
 
GPS MODULE AVAILABLE/ACCURATE POSITION HOLD
 
The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
 
 
NEW ASSISTANT SOFTWARE FOR SMARTPHONE
 
The Naza-M now provides assistant software for iPhone4s, iPhone5, iPad3, iPad4, iPadmini, iPod5. You can do parameter adjustments at any time on your mobile devices, using only the BTU with a built-in Bluetooth module which makes it easier and convenient. It uses low power Bluetooth to minimize the power consumption of your mobile devices. It is easy to use and will automatically save your last connection records. The password mechanism ensures your safety link. Parameters can be automatically synchronized to the Cloud Server and can be restored immediately when you changed your mobile devices.
 
 
IOSD MINI SUPPORTED
 
The Naza-M now supports iOSD Mini. This will undoubtedly give you a fantastic FPV flight performance. Depending upon DJI’s accumulation of historic and reliable information integration technology, the iOSD Mini can grab the most accurate first-hand flight data information in the shortest possible time.
 
 
INTELLIGENT ORIENTATION CONTROL
 
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1):
 
In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2):
 
 
ENHANCED FAILSAFE MODE
 
If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.
 
 
TWO LEVELS OF LOW VOLTAGE PROTECTIONS
 
In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.
 
 
MOTOR ARM AND MOTOR DIS-ARM
 
There are four ways to start the motors, see the following picture:
 
When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors. 
 
Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.
 
Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover.
 
 
PPM, S-BUS & ORDINARY RECEIVER SUPPORTED
 
Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.
 
 
INDEPENDENT LED MODULE
 
The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.
 
 
BUILT-IN GIMBAL STABILIZATION FUNCTION
 
The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.
 
 
MULTI-ROTOR ONE-POWER OUTPUT FAIL PROTECTION
 
In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk.
 
 
REMOTE GAIN ADJUSTMENT
 
The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.
 
 
NEW ASSISTANT SOFTWARE & FIRMWARE ONLINE UPDATE
 
The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.
 
 
 
 
F550 ARF + DJI Landing skid
ULTRASTRENGTH MATERIAL
 
Frame Arms adopt PA66+30GF ultrastrength material design, providing better crashworthiness.
 
 
INTEGRATED PCB WIRING
 
The use of high strength compound PCB frame board, makes wiring of ESCs and battery safer and easier.
 
 
HUGE ASSEMBLY SPACE
 
Optimized frame design, which provides abundant assembly space for autopilot systems.
 
 
ATTRACTIVE FRAME ARMS
 
Provide different color frame arms: red, white, black, which makes your flight more colorful.
 
DJI Landing skid
 
 
DJI officially released the Landing Gear for Flame Wheel. It will surely bring you more fun of flight, no matter you are a newcomer or an experienced pilot.
 

 

Important: The product is Export Controlled and is for Commercial purposes only

This product is Export Controlled.  If you are located outside of the United States of America and Canada, an end user statement on company letterhead, signed by an officer of your company must accompany this order.  For 30Hz cameras an Export Licesne is required and will take approximately 60-90 days ARO.  In cases where 9Hz cameras are quoted and purchased outside the United States of America and Canada, an end user statement is also required but may not need an Export License.  End user statements must include the following statement:

1) These commodities are for commercial use only.

2) They will not be used in the design, development, production or use of nuclear, chemical or biological weapons or missiles.

Your order may be declined and refunded if we cannot verify the end-user statements.

Wide Field of View (WFOV) Commercial Version 

 
Tau  2  640  is  a  640x512  LWIR  uncooled  focal  plane  array  (FPA) camera with a pixel size of 17 microns. Several wide field of view lens options are offered. Lenses are hard carbon coated for harsh environments. 
Tau ouput multiple digital video formats as well as NTSC video at 30 fps as a standard, or PAL video at 25fps.
A  number  of  optional  accessories  provide  additional  Tau connectivity.  
H = Hard Carbon Coated Lens 
 
Tau 2 LWIR Thermal Imaging Camera Cores

Tau 2 is the latest generation product in FLIR’s Tau family of LWIR uncooled thermal imaging camera cores.

Two significant advances in Tau 2 are the introduction of:

  • Enhanced electronics for improved image processing; and
  • FLIR’s 336×256, 17μ-pitch sensor format (in addition to the 324×256, 25μ-pitch & 640×512, 17μ-pitch Tau 2 versions)

There is no difference in form or fit between Tau 2 and the first generation Tau cameras. The upgraded Tau 2 electronics enable additional functions and capabilities that are planned for release on a periodic basis. A comparison of the Tau2 version evolution can be found here: Tau Feature Comparison. Note that earlier versions of Tau (1.X) cannot be upgraded to the newer Tau 2 configuration.

Since the electronics are common between the Tau 2 – 640, Tau 2 – 336, and Tau 2 – 324, integrators have direct compatibility between the different camera formats, and most Tau camera versions share the same lens options.

FLIR also offers three low-cost Tau 2 options for applications that do not require high resolution imaging:

  • Tau2 160 a 160×128 with 25 μ-pitch
  • Tau2 162 a 160×128 with 50 μ-pitch
  • Tau2 168 a 160×128 with 34 μ-pitch

Specifications

Overview

Tau 640

Tau 336

Tau 324

Thermal Imager Uncooled VOx Microbolometer
FPA / Digital Video Display Formats 640 × 512 336 × 256 324 × 256
Analog Video Display Formats 640 × 480 (NTSC); 640 × 512 (PAL)1
Pixel Pitch 17 μm 25 μm
Spectral Band 7.5 - 13.5 μm
Full Frame Rates 30 Hz (NTSC)
25 Hz (PAL)
30/60 Hz (NTSC)
25/50 Hz (PAL)
Exportable Frame Rates 7.5 Hz NTSC; 8.3 Hz PAL
Sensitivity (NEdT) <50 mK at f/1.0
Scene Range (High Gain) -25°C to +135°C -25°C to +100°C -25°C to +135°C
Scene Range (Low Gain) -40°C to +550°C
Time to Image <5.0 sec <4.0 sec
Factory Optimized Video Yes

Physical Attributes

Tau 640

Tau 336

Tau 324

Size (w/o lens) 1.75" x 1.75" x 1.18"
Lensed & Lensless Configurations Available Yes
Precision Mounting Holes (M2x0.4) on
3 sides (2 per side)
Yes
Sealable Bulkhead Mounting Feature
on Lens Barrel (M29×1.0), WFOV Only
Yes

Radiometric Features

Tau 640

Tau 336

Tau 324

Isotherms See Product Spec page 34 Section 3.3.3.1
Spot Meter Temperatures measured in central 4×4
Advanced Radiometry Improved accuracy, moveable spot meter, image metric data, T-Linear (digital output)
(OEM part number required, additional charge)

Image Processing & Display Controls

Tau 640

Tau 336

Tau 324

NTSC/PAL (field switchable) Yes
Image Optimization Yes
Digital Detail Enhancement Yes
Invert/Revert (analog and 8-bit digital) Yes
Polarity Control (black hot/white hot) Yes
Color & Monochrome Palettes (LUTs) Yes
Digital Zoom 2x, 4x, 8x 2x, 4x
Continuous Zoom Yes
Symbology (256 gray & 256 color) Yes, single-pixel resolution for all models

Digital Video

Tau 640

Tau 336

Tau 324

LVDS (14-bit or 8-bit) Yes
CMOS (14-bit or 8-bit) Yes
BT.656 (8-bit) Yes
Camera Link (Expansion Bus Accessory Module) Yes
Slow Video Option (factory configured) Yes

Interfacing

Tau 640

Tau 336

Tau 324

Primary Electrical Connector 50-pin Hirose
Input Power (max 2.5 amp during shutter) 4.0 - 6.0 VDC
Power Dissipation, steady state <1.2 W ~1.0 W
Flat-Field Correction (FFC) Duration <0.5 sec
Power Reduction Switch (disables analog video) Yes
RS-232 Compatible Communication 57,600 & 921,600 baud
External Sync Input/Output Yes
Discrete I/O Controls Available Yes (10-camera minimum)
Settable Splash Screens Yes (10-camera minimum)
User Configurability via SDK & GUI Yes
Dynamic Range Switching No Yes

Environmental

Tau 640

Tau 336

Tau 324

Operating Temperature Range -40°C to +80°C
Non-Operating Temperature Range -55°C to +95°C
Temperature Shock 5°/min
Operational Altitude +40,000 feet
Humidity 5% - 95% non-condensing
Vibration 4.3g three axis, 8 hr each
Shock 200g shock pulse w/ 11 msec sawtooth
ROHS Compliant
 

 

Wide Field of View (WFOV) Models

 

7.5 mm
f/1.4

9 mm
f/1.25 for Tau 324 & 336
f/1.4 for Tau 640

13 mm
f/1.25

19 mm
f/1.25

Tau 640
(17μ 640×512)
FoV
iFoV
90° x 69°
2.267 mr
69° x 56°
1.889 mr
45° x 37°
1.308 mr
32° x 26°
0.895 mr
Tau 336
(17μ 336×256)
FoV
iFoV
45° x 35°
2.267 mr
35° x 27°
1.889 mr
25° x 19°
1308 mr
17° x 13°
0.895 mr
Tau 324
(25μ 324×256)
FoV
iFoV
63° x 50°
3.333 mr
48° x 37°
2.778 mr
34° x 26°
1.923 mr
24° x 18°
1.316 mr
Min Focus Distance 2.5cm 3.2cm 7.6cm 15.3cm
Hyperfocal Distance 1.2m 2.1m 4.4m 9.5m
Hyperfocal Depth of Field 0.6m 1.1m 2.2m 4.8m
Lens Mount

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Applications

Learn more about how others are using the FLIR Tau camera core.

 

AeroVironment

AeroVironment's PumaThe Puma AE UAS uses a Tau640. To learn more visitAVInc.com

 

Lockheed

Lockheed's Desert Hawk IIIThe Desert Hawk III UAS uses a Tau 640. To learn more visitLockheedMartin.com

 

Tuberculosis Free New Zealand

TB Free NZTB Free NZ is using a Tau2 25mmcamera core in their UAVs. Watch the newscast to learn more TB Free NZ

 

Cloud Cap

Cloud Cap's T2 GimbalThe TASE350 Gimbal uses a Tau 640. To learn more visitCloudCapTech.com

 

Nivisys

Nivisys ImageNivisys UTAM-32 Universal Thermal Monocular uses a Tau 324. To learn more visitNivisys.com

 

Transformational Security

The TS-1 handheld thermal imager uses a Tau 640. To learn more visitPowerfulSecurity.com

 

UAVS Poland

ARS System GimbalThe ARS System gimbal designed for surveillance and security applications uses a Tau 640. Watch sample video or visit UAVS.eu to learn more

Loading...
Loading...
Loading...
Loading...
Loading...