Pre-Order Shipment ETA: June 22, 2015
ESC Programming Device: KDE Direct XF Device Manager Adapter
The new UAS HVC series brings to life the next-generation of technology for UAS and Multi-Rotor operation; including an all-Aluminum 6061-T6 case for cool-running temperatures and rugged-construction, allowing the ESCs to be used in a wide-range of harsh environments and commercial/industrial applications. The new series also comes pre-loaded with the latest production firmware, including these new, market-leading technologies:
The UAS HVC series is compatible with 3S - 12S LiPo (12.6V to 50.4V) power systems - allowing for the next level of performance and efficiency for your sUAS and Multi-Rotor applications. In addition, the UAS HVC series includes active anti-spark circuitry, protecting the integrity and life-span of the critical connectors upon each initial plug-in and system power-up.
The series is tuned and optimized for the KDE Direct XF Multi-Rotor Brushless Motor Series, for simple plug-and-play operation. No additional throttle calibration is required for most applications and settings are factory programmed.
ESCs include 200°C, 12 AWG silicone-wire power leads and 13 AWG silicone-wire motor leads with dual ф6.5mm and ф4.0mm 24K matching Bullet Connectors.
Programming: Proprietary Algorithm, 600Hz Refresh, Dynamic Advance Timing
Features: Active Anti-Spark Circuit, Aluminum 6061-T6 Case
|Refresh Rate||600 Hz (50 - 600Hz Adaptive)|
|Maximum Peak Current||135 A (5 s)|
|Maximum Peak Power||5,995 W (5 s)|
|Maximum Continuous Current*||75+ A (180 s)|
|Maximum Continuous Power*||3,330+ W (180 s)|
|Maximum Efficiency||> 98%|
|Voltage Range||12.6 V (3S) - 50.4 V (12S)|
|Internal BEC||None (Opto-Isolation)|
|Maximum RPM||240,000 rpm (2-Pole)|
|PWM Rate||Adaptive Dynamic Algorithm|
|Advance Timing||22° - 30° Dynamic Algorithm|
|ESC Size||37 mm (W) x 82 mm (L)|
|ESC Weight||86 g (110 g with Wires/Bullets)|
|Power Leads||12 AWG, 200°C|
|Motor Leads||13 AWG, 200°C|
|ESC Lead||22 AWG, 3-Wire JR|
|Power Connects||ф4.0 / ф6.5 mm Matched Pair|
|Motor Connects||ф4.0 mm Female|
*: ESC requires consistent airflow (5 mph or greater) across the heatsink to maintain maximum continuous current and power ratings during operation, specified at full-load condition (100% throttle). Increasing airflow or adding additional cooling can further increase the capabilities of the controller and extend the lifespan of the critical internal components.